1391-DES45-DI-AQB | | Servo Controller drive

The 1391-DES45-DI-AQB is a Digital Servo drive that is microprocessor based primarily used with ’s 1326 Servo motor. This servo drive is designed in compact form however, this drive supports add-on components that is part of the drive’s scalability feature.

Main featured of the 1391-DES45-DI-AQB include an integrated display that is used for local configuration of the servo drive’s parameters. It also has an Encoder output with optional selections including 2048, 1024, 512 and 256 pulses per motor revolution. Higher pulses provide higher resolution and higher feedback accuracy.

The front panel of this servo drive display the Human Interface Module (HIM) with Five (5) digital keypad to allow navigation and modification of the drive’s parameters. It also has an integral status LED that flashes green when no fault is detected and low bus voltage; Steady Green when no fault and bus voltage is at the right level; Flashes Red when a drive fault has occurred. It also has an Enable LED which is steady green when enable input is closed. 

When the enable input is open, the enable LED is not illuminated.

The TB2 and TB3 interface terminals are located at the bottom of the servo drive. TB2 is used for interfacing external signal while TB3 is utilized to terminate encoder output signals. Integrated fuses and circuit breaker as well as TB4, TB5 and duty cycle selector switch are situated on top of the drive. 

Though this drive has internal protection circuitry, external protection is recommended for installation. If using an isolation transformer, recommended appropriate 1391 Isolation transformers as the use of 3rd party transformer will void the UL listing of the equipment.

If you still need inquiries from the following other brands, please contact:plcsale@mooreplc.com

Picture/ Video Request

It's like having the store come to you!  

Request for Video/Picture