22C-D038A103 |AB| AC Drive

About product

The 22C-D038A103 AC Powerflex 400 Drive by has an output rating of 18.5 kW at 25 Horsepower, with an Amperage of 38, consistent over a 5-degree temperature change between 45 and 50 degrees Celsius. Recommended motor circuit protection is 140M-F8E-C45 with a 100-C60 contactor and a minimum enclosure volume of 9086 square inches. It dissipates around 606 Open IP20 Watts and has 50 fuses.

The 22C-D038A103 is a Frame D drive with enclosure rating of IP30, NEMA/UL Type 1 with no flange mount. When terminating I/O signals to the drive, maximum wire size is 33.6 mm sq. (or 2 AWG). (Wire cannot be smaller than 8.4 millimeters squared, or 8 AWG). Wiring Torque is 5.1 N-m, or 45 pounds to an inch.

This unit has an integral LCD keypad with two rows of 16 characters each and 5 LED indicator lights. This integral keypad allows local monitoring and control such as start and speed commands. Through this unit’s featured Auxiliary Motor Control system, up to three additional line-started motors can be controlled side by side with the central motor, which would be controlled directly by the 22C-D038A103 Powerflex drive. Use of this system can result in up to a 400% output, where the drive-controlled motor and all three of the additional motors are operating at their maximum speeds. This system can also be automated, causing the additional motors to begin operating as soon as demand increases beyond the capabilities of the first motor.

This Serial (RS485) drive supports FLN, DSI, Modbus RTU and Metasys N2 as standard communication protocols. It also supports several optional protocols, including ControlNet, LonWorks, Ethernet/IP and Device Net. Its optional software options are Pocket PC/Windows Mobile and Windows Based.

The 22C-D088A103 is applicable for AC motors rated 18.5kW or 25.0 HP. The input voltage requirement of this adjustable frequency AC drive is 340-528VAC, 3-Phase, input current of 40 Amperes and frequency range of 48-63 Hz. This drive supports panel mounting application within an enclosure that provides adequate protection from common contaminants such as corrosive air or gas, water, dust, oil and grease. This drive also requires external protection devices such as DC link chokes, EMC filters, AC line reactors, Harmonic filters, fuse and other electrical protection devices to maximize the drive’s operation lifespan.

Picture/ Video Request

It's like having the store come to you!  

Request for Video/Picture