2711P-RPD | | logic module

About product

The 2711P-RPD is an accessory module that is manufactured by . This module is specifically a logic module that is used with the PanelView Plus and PanelView Plus CE modules however, cannot be used with the newer PanelView Plus 6 operator terminals. The 2711P-RPD comes with an isolated DC input and a marine-certified component. This Logic module accepts a nominal input voltage of 24 VDC which is used to power up the circuitries of the operator terminal. This component does not come pre-installed with internal CompactFlash cards therefore, users may need to transfer an existing working CompactFlash memory or separately acquire an internal CompactFlash card. Compatible CompactFlash memory modules are 2711P-RW1 which is a 64 MB internal CompactFlash with FactoryTalk View ME software for PanelView Plus logic modules; 2711P-RW2 with 128 MB memory, 2711P-RW3 with 256 MB memory; 2711P-RW6 which is a 128 MB internal CompactFlash with FactoryTalk View ME software for PanelView Plus CE logic modules; 2711P-RW7 with 256 MB memory, and 2711P-RW8 with 512 MB internal memory. Aside from the internal memory, the 2711P-RPD also hosts the base communication ports such as RS232 and USB ports of the operator terminal. This logic module is located at the back of the display module and must be mounted only when power is completely removed to the terminal. This logic module requires appropriate and careful handling as it hosts electrostatic-sensitive components. Wear ground straps and always work on a flat, clean, grounded surface to protect the logic module and internal components.

The 2711P-RPD is an isolated-DC logic module for PanelView Plus and PanelView Plus CE 700 to 1500 terminals. It is marine-certified for heavy-duty applications. The 2711P-RPD is not designed for use with PanelView Plus 6 terminals. A separate display module is required to provide a display for the terminal. If logic and display modules are ordered separately, the 2711P-RPD should be attached to the display module before panel installation. The 2711P-RPD does not include Flash or RAM memory. The Flash and RAM memory modules need to be ordered separately and installed in the module before they can be used for custom applications. The 2711P-RPD includes one CompactFlash slot, a 10/100 Ethernet LAN port, two USB ports, and one serial port. A 24 Volts DC power supply with SELV or PELV output is required to power up the 2711P-RPD. 

Other hot selling product models:

Picture/ Video Request

It's like having the store come to you!  

Request for Video/Picture