F31X134EPRBEG1 FR00/0 General Electric INTERFACE BOARD ASM

F31X134EPRBEG1 FR00/0 Info.
Product Name : GE Fanuc
Series: GE Fanuc 90-30
Product Model: F31X134EPRBEG1 FR00/0
Spare Model:-
Product Parameters:-
Product Describe:
F31X134EPRBEG1
DISCONTINUED BY MANUFACTURER
INTERFACE BOARD ASM
MANUFACTURER: General Electric

Product Description
F31X134EPRBEG1--Encoder Process Board

The F31X134EPRBEG1 is a component fabricated by the General Electric Company to be used by various general purpose drive systems, including the DC-300 drive.  This PCB is not system-specific, but rather can be used in a number of similar drive systems. The DC-300 drive and other drives like it are typically now considered obsolete, but they were designed to be flexible and powerful systems capable of completing many tasks within industrial settings.  

The  F31X134EPRBEG1 is an Encoder Process Board. It is part of the 531X series of boards and is marked with a secondary board number of 531X134EPRBEG1.  The code FR00/0 also appears on one edge.

The  F31X134EPRBEG1 has a three-screw terminal strip located in one corner.  This terminal strip can be used to monitor the motor speed using a voltmeter between 1 TB-1 and 1 TB-3.  It can also be used to adjust the PI-tach scale for 50% of motor speed. The board has over twenty jumpers, four resistor network arrays,  and seven potentiometers. Manuals from GE give more information on jumper settings.

The  F31X134EPRBEG1 has three male vertical pin cable connectors.  It has a single male vertical pin header connector. These components are used to connect the board to external components or to other boards.   The board also has one switch component with seven individually numbered toggles on the top surface of the switch. The toggles may be set to a default “closed” position, or to an “open” position.   The switch is labeled “Tach Range.” The board has over a dozen integrated circuits; all are marked with the manufacturer part numbers for simple identification. 

About GE Fanuc Series 90-30
GE Fanuc Series 90-30 are Programmable Logic Controllers (PLC) from GE. These controllers are designed for use in entry level to large and complex applications, as it can accommodate a minimum of Thirty-Two (32) I/Os up to 4096 I/O capacity.Series 90-30 supports a wide variety of communication protocols such as Genius Bus, World FIP, Profibus-DP, Interbus-S, LonWorks, DeviceNet, Ethernet or SDS protocols. 

These protocols allow any controller to handle communications between Visualization systems such as Human MAchien Interfaces (HMI), Supervisory Control and Data Acquisition (SCADA), Distributed Control Systems (DCS) and 3rd party software applications. Implementation or Remote I/O systems also uses the same communication protocols, enabling the 90-30 PLC series to maximize I/O capacity and to implement the required automation by the process.

GE Fanuc Series 90-30 is a modular, versatile and scalable PLC Platform. The Controllers are categorized as Entry level Standard Models, Mid-Range Standard Levels and High-Performance Models.

Why choose us?

Integrity, reliability and honesty are the most important principles of our company. We will work hard to provide you with the best service and the most favorable products, from PLC to servo motor, from sensor to relay, from switch to pump and valve. Your choice of us is of great significance to us, and we will cherish and give it to us. At every opportunity, we will always be your reliable trader and will support you in every step of your success.

Hot-Selling 

Picture/ Video Request

It's like having the store come to you!  

Request for Video/Picture